The QIMMIQ ATOS X1 is an advanced 1-axis gimbal designed for stabilizing smartphones or action cameras. It offers two stabilization modes: a light stabilization mode for action cameras and an intensive (heavy) stabilization mode for larger smartphones.
Technical Specifications:
- Dimensions: L70mm x W64mm x H47mm
- Weight: 185 g (170 g)
- Charging Current: 1A – 5V (charging time is approximately 40 minutes)
- Operating Voltage: 3.7 V
- Battery Capacity: 550 mAh (lithium battery)
- Operating Time: 2 ~ 3 hours
- Working Temperature: -10 °C ~ +40 °C
- Relative Humidity: 5% ~ 95% (non-condensing)
- Ingress Protection: IP54
- Storage Temperature: -10 °C ~ +60 °C
Usage Features:
Assembly (Step 1):
To begin, fix the gimbal via its fixation element (F) to any compatible mount using a screw.
Recharging the Battery (Step 2):
To charge the device, plug it into any USB port (B). A red constant light (C) will illuminate during charging. Once the battery is fully charged, the light will turn off.
Power ON / OFF (Step 3):
- To turn the device on: Press and hold the power button (A) for at least 3 seconds.
- To turn the device off: Press the power button (A) twice.
- Light Indicators (C): When the gimbal is on, lights 1 & 2 will blink once per second. Light 3 will remain constant (refer to page 12/20/28/36 for details on light 3).
- Stabilization Modes:
- By default, when the device is powered on, the "light" stabilization mode is activated. In this mode, light 4 will remain off.
- To switch to the "heavy" stabilization mode, press the power button (A) once. Light 4 will then turn on.
- The "heavy" stabilization mode is recommended for heavier phones or cameras.
Cautions:
- Always install the camera or smartphone on the gimbal before powering it on, and remove it after turning the power off.
- Ensure the gimbal is powered off when it is empty (not holding a device).
- When not in use, always place the gimbal back in its initial mechanical posture within its packaging box.
- Always turn off the power when the device is not in use.
- Do not extend the stabilizer beyond its maximum range of motion.
- Use the gimbal only for non-impact activities.
- Always avoid interference with trees or other physical objects during use.
Warnings / Warranty:
- This product is not intended for use by individuals (including children) with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning the use of the appliance by a person responsible for their safety.
- Children should be supervised to ensure they do not play with the appliance.
- This product must be used only for its intended purposes and in accordance with local regulations, terms, and any applicable policies and guidelines.
- The manufacturer accepts no liability for damages, injuries, or any legal responsibilities incurred directly or indirectly from the use of this product.
- Failure to operate this product in accordance with all instructions could result in injury to yourself or others, or damage to the product or other property.
- The manufacturer does not provide service for products obtained from unauthorized channels.
- Exercise caution when using your X1 and its accessories as part of an active lifestyle.
To avoid potential injury:
- Do not drop, disassemble, modify, crush, bend, deform, puncture, shred, microwave, incinerate, or paint the gimbal.
- Any damage or malfunction caused by water is not covered under warranty.
- Do not insert foreign objects into any opening on the X1 or its accessories, such as the USB port.
- Do not use the X1 or its accessories if they are damaged (e.g., cracked, punctured, or in contact with liquid).
Maintenance Features:
- The product comes with a 24-month warranty from the purchase date.
- For more information on warranty applicability or after-sales service, contact assistance@sopeg.com.
- Manufacturer information: SOPEG SAS, Burospace 2 - Route de Gisy – BP24 - 91571 BIEVRES CEDEX – France. Email: info@sopeg.com. Tel.: + 33 1 60 13 0888.
- For more detailed information about this product, visit: http://www.qimmiq-360.com.
Need help?
General
To Next Page