Important Cautions
About running-in of a motorcycle
The first 1000 km operation is very important in the entire
service life of a motorcycle. A correct running-in can guarantee
both the longest service life and the best performance of the
vehicle. Running-in can polish machined surfaces and form
smooth engagement.
Careful and patient running-in can make the motorcycle
stable in driving and give a full play to its excellent
performance. It is important not to do any operation that may
cause overheat to engine components.
For specific running-in method, please refer to
"Running-in of a new vehicle".
Please carefully read the manual and strictly observe all
instructions or descriptions.
Special attention shall be paid to the contents emphasized
with the terms of "warning" "caution" and "note", etc.
Warning……It concerns with personal safety. Ignoring it
may result in accident.
Precaution……It refers to operational methods that must
be followed or measures that should be taken, so as to prevent
damage.
Note ……It refers to special explanations to make
maintenance or important descriptions more explicit.
The operation manual shall be deemed as a permanent
document of the motorcycle. When transfer the vehicle to
others, the instruction manual shall also be transferred to the
new owner.
To Next Page
Need help?
General
