Qingqi QM125-2X GS User Manual

48 pages

To Next Page

Important Cautions

About running-in of a motorcycle

The first 1000 km operation is very important in the entire

service life of a motorcycle. A correct running-in can guarantee

both the longest service life and the best performance of the

vehicle. Running-in can polish machined surfaces and form

smooth engagement.

Careful and patient running-in can make the motorcycle

stable in driving and give a full play to its excellent

performance. It is important not to do any operation that may

cause overheat to engine components.

For specific running-in method, please refer to

"Running-in of a new vehicle".

Please carefully read the manual and strictly observe all

instructions or descriptions.

Special attention shall be paid to the contents emphasized

with the terms of "warning" "caution" and "note", etc.

Warning……It concerns with personal safety. Ignoring it

may result in accident.

Precaution……It refers to operational methods that must

be followed or measures that should be taken, so as to prevent

damage.

Note ……It refers to special explanations to make

maintenance or important descriptions more explicit.

The operation manual shall be deemed as a permanent

document of the motorcycle. When transfer the vehicle to

others, the instruction manual shall also be transferred to the

new owner.

Need help?

Do you have a question about the Qingqi QM125-2X GS and is the answer not in the manual?

Qingqi QM125-2X GS Specifications

General

Engine Type	Single cylinder, 4-stroke, air-cooled
Transmission	5-speed manual
Fuel System	Carburetor
Fuel Tank Capacity	12 liters
Front Suspension	Telescopic fork
Rear Suspension	Dual shock absorbers
Front Brake	Disc
Rear Brake	Drum
Seat Height	780 mm
Ground Clearance	160 mm
Displacement	124 cc
Max Torque	9.2 Nm @ 7500 rpm