Qingqi QM200GY-B User Manual

—0—
Important Precautions
Information About the Running-in Operation of Motorcycles
The first 1,000 km of mileage is the most important phase in the whole
lifetime of your motorcycle. During this period, correct running-in operation
may not only prolong the lifetime, but also make the best of your new
motorcycle. The surfaces of the joining components can be polished, resulting
in smooth engagement.
Careful and patient running-in operation can facilitate stable riding and
best performance of your motorcycle. Special attention must be paid to
operations that cause the engine to be overheated.
Refer to the section on “Running-in of New Motorcycles for details
about the running-in operation.
Please carefully read this manual and strictly observe the relevant
stipulations and instructions.
Terms such as Warning, Caution and Attention are used in this manual
to indicate important information. Read these parts carefully.
Warning ---- Instructions concerning the safety of a rider. Ignorance of
these instructions may lead to traffic accidents.
Caution ---- Instruction relating to the protection of the motorcycle.
Ignorance of these instructions or measures may cause damage to your
motorcycle.
Attention ---- Instructions concerning the maintenance of the
motorcycle or the explanation of other important information.

Qingqi QM200GY-B Specifications

General

Engine Type	Single cylinder, 4-stroke, air-cooled
Bore x Stroke	63.5 mm x 62.2 mm
Compression Ratio	9.2:1
Fuel System	Carburetor
Ignition	CDI
Transmission	5-speed
Final Drive	Chain
Front Suspension	Telescopic fork
Front Brake	Disc
Rear Brake	Disc
Front Tire	90/90-21
Rear Tire	120/90-18
Wheelbase	1360 mm
Seat Height	880 mm
Ground Clearance	260 mm
Starting System	Electric and kick start
Frame Type	Steel
Rear Suspension	Monoshock

Summary

Important Precautions and Safety

Motorcycle Running-in Operation

Explains the importance of the first 1,000 km for motorcycle lifetime and performance.

Safety Terms Explained

Defines Warning, Caution, and Attention terms used in the manual for safety and maintenance.

Rider Safety Precautions

Outlines essential safety measures for riding, including helmet, clothing, and weather conditions.

Component Identification and Location

Serial Number Locations

Identifies where chassis and engine serial numbers are located on the motorcycle.

Handlebar Instruments

Details the instruments located on the motorcycle's handlebar.

Key Component Views

Illustrates and labels key components visible on the left and right sides of the motorcycle.

Operation and Controls

Ignition System and Operation

Explains the ignition key, instrument panel indicators, and ignition switch operation.

Handlebar Control Systems

Details controls on both left and right handlebars, including switches, levers, and throttle.

Starting, Lighting, and Fuel Systems

Covers electric start, lamps, fuel tank cap, and fuel cock operation.

Riding Operations and Gear Shifting

Explains gear shifting, braking, side stand usage, and carburetor choke system.

Fuel, Oil, and Running-in Procedures

Fuel and Engine Oil Recommendations

Advises on suitable fuel and engine oil types for the motorcycle.

Running-in Operation Guidelines

Provides instructions on maximum speed and varying engine speed during break-in.

Initial Operation and Maintenance Advice

Offers advice on constant speed, oil circulation, and initial maintenance for new motorcycles.

Pre-Ride Inspections and Riding

Inspection Prior to Riding

Lists essential checks for steering, lighting, brakes, tires, and other components before riding.

Starting the Engine and Riding Techniques

Guides on starting the engine and general riding techniques like gear shifting and slope riding.

Maintenance and Service

Braking System Maintenance and Checks

Covers braking system safety, daily checks, and maintenance schedule introduction.

Detailed Maintenance and Lubrication Schedules

Provides schedules for component maintenance, lubrication, and spoke care.

Spark Plug, Oil, Filter, Chain, and Tire Care

Details maintenance for spark plugs, engine oil, air filter, chain, and tires.

Troubleshooting

Engine Starting and Performance Issues

Addresses engine start failures, performance problems, abnormal sounds, and overheating.

Storage and Service Return

Motorcycle Storage Procedures

Provides guidelines for long-term storage, including fuel and battery care.

Post-Storage Service Procedures

Details steps for returning a stored motorcycle to active use.

Technical Specifications

Dimensions, Engine, and Performance Specs

Lists dimensions, engine details, performance data, and electrical system specifications.

Wiring Diagram and Manufacturer Information

Motorcycle Wiring Diagram

Shows the electrical wiring diagram for the motorcycle.

Disclaimers and Copyright

Contains information about product changes, manual discrepancies, and copyright.