QJMOTOR LTR150 2024 - User Manual

General advice for safe motorcycle operation and rider conduct.

Emphasizes helmet use as crucial motorcycle body protection.

Outlines special care needed for slippery roads and reduced visibility.

Details maximum load capacities for storage compartments to ensure safety.

Describes the function of left/right turn signal indicators and their display.

Details the indicator light for the high beam headlight function.

Explains the engine fault light, its behavior, and required actions.

Details the fuel level indicator and when to refuel.

Explains the function of the speedometer in displaying current speed.

Describes how to view trip and total mileage, and unit switching.

Explains the functions of the left handlebar button for mileage switching and unit selection.

Explains the indicator light for the automatic start and stop system.

Lists checks for when the start button yields no response.

Provides checks for when the engine cranks but fails to ignite.

Explains the meaning of different fault lamp flashing patterns.

Instructions on retracting stands before riding, with safety warnings.

Guidance on releasing the brake lever and avoiding sudden acceleration.

Explains using the throttle to control speed and power.

Details the proper technique for using both front and rear brakes simultaneously.

Provides specific advice for riding in wet conditions to prevent skidding.

Steps for safely parking the motorcycle, including locking the steering.

First step in troubleshooting is checking the fuel level.

Recommends inspecting the spark plug for spark generation.

Detailed checks for brake levers, performance, and fluid levels.

Instructions on checking brake pad wear and replacement.

Procedures for checking engine oil levels and performing replacements.

How to check for looseness or damage in steering stem bearings.

Verifies that the brake light operates correctly with lever activation.

Covers checking tire pressure, tread depth, and surface for damage.

Details how to check and add coolant to the engine cooling system.

Procedures for checking and changing the engine gear oil.

Covers cleaning, gap adjustment, and replacement of the spark plug.

Details cleaning procedures for the throttle body to maintain performance.

Describes the fuel system components and their function.

Specifies correct tire pressures for optimal stability and wear.

How to adjust the headlight beam up or down for proper illumination.

Location of fuses and troubleshooting advice for blown fuses.

Information on battery location and handling, including replacement steps.

Procedures for replacing the air filter element for optimal engine performance.

Instructions for understanding and maintaining the Anti-lock Braking System.

Outlines the owner's rights and responsibilities regarding the warranty.

Specifies duties of the owner to maintain warranty validity.