To Next PageTo Next PageWhy is my Qleeno Floor Machine leaking water?
If your Qleeno Floor Machine leaks water, try the following: * Clean the water tank seals. * Ensure the Water Fill cap is tight and properly threaded. * Check that the water pump is on. * Inspect the water tank for any damage.
How to fix qleeno Floor Machine that will not start?
If your Qleeno Floor Machine won't start, check the electrical connection and fuse.
What to do if my qleeno Floor Machine makes beeping sound and shuts off?
If your Qleeno Floor Machine makes a beeping sound and shuts off, it may be due to an empty water tank. Empty the dirty water and refill the clean water tank.
Why is the control panel Warning Indicator Light on my qleeno QS101?
If the control panel Warning Indicator Light is on for your Qleeno Floor Machine, the water tank is likely low. Empty the dirty water tank and refill the clean water tank.
What to do if water will not flow after starting my qleeno Floor Machine?
If water will not flow after starting your Qleeno Floor Machine, check the filters for clogging.
Why does my qleeno Floor Machine leak water when lifted for transport?
If your Qleeno Floor Machine leaks water when lifted for transport, check that both caps on the water tank are firmly sealed.
General| Brand | qleeno |
|---|---|
| Model | QS101 |
| Category | Floor Machine |
| Language | English |
Defines hazard alert terms like DANGER, WARNING, CAUTION, NOTICE for user safety.
Lists essential safety rules for operating the Qleeno machine, covering usage and inspection.
Provides general safety advice, inspection procedures, and user awareness guidelines.
Describes the Qleeno as an electric-powered wet floor scrubber for commercial use.
Lists key operational parameters such as working width, tank volume, voltage, and weight.
Outlines essential inspection and preparation steps to ensure safe and effective operation.
Details procedures for mounting the brush/pad, unfolding the handle, and adjusting casters.
Covers procedures for starting, operating, and regulating the Qleeno machine.
Provides instructions for safely shutting down the Qleeno and disconnecting power.
Lists common operational issues and their corresponding corrective actions.
Details how to change the fuse and general cleaning advice for the Qleeno.
Covers cleaning the hub and replacing the squeegee ring for optimal performance.
Outlines routine maintenance tasks and expected component lifetimes.
Identifies replaceable components with part numbers and quantities.
Details the warranty terms, exclusions, limitations, and customer remedies.
