What to do if my Qlima S-4626 is erratic?
If your Qlima Air Conditioner operates erratically, it might be due to interference from cell phone towers or remote boosters. Try disconnecting the power and then reconnecting it. You can also press the ON/OFF button on the remote control to restart operation.
Why does my Qlima Air Conditioner emit a bad odor?
Your Qlima Air Conditioner might emit a bad odor because it has absorbed smells from the environment, such as furniture, cooking, or cigarettes. Another reason could be that the unit’s filters have become moldy. In this case, you should clean the unit’s filters.
Why does my Qlima S-4626 change from COOL/ HEAT mode to FAN mode?
Your Qlima Air Conditioner may switch to FAN mode to prevent frost from forming. Once the temperature increases, it will go back to the previously selected mode. Also, the unit turns off the compressor when the set temperature has been reached. The unit will continue operating when the temperature fluctuates again.
What to do if Qlima S-4626 does not turn on?
If your Qlima Air Conditioner doesn't turn on, it might be due to the 3-minute protection feature, which prevents the unit from overloading. Wait for three minutes before trying to turn it back on.
Why is dust emitted from my Qlima Air Conditioner?
If your Qlima Air Conditioner emits dust, it may have accumulated during a long period of non-use. This dust is then emitted when the unit is turned on. To prevent this, cover the unit during long periods of inactivity.
Why does my Qlima Air Conditioner indoor unit make noises?
A rushing air sound may occur in your Qlima Air Conditioner when the louver resets its position. Also, a squeaking sound may occur after running the unit in HEAT mode due to expansion and contraction of the unit’s plastic parts.
Why do both Qlima Air Conditioner units make noises?
A low hissing sound during Qlima Air Conditioner operation is normal; it’s caused by refrigerant gas flowing through both units. This sound can also occur when the system starts, stops, or is defrosting, as the refrigerant gas stops or changes direction. Squeaking noises can also occur due to the normal expansion and contraction of plastic and metal parts caused by temperature changes during operation.
Why does the indoor unit of my Qlima S-4626 emit white mist?
In humid regions, a large temperature difference between the room’s air and the conditioned air can cause white mist to be emitted from the indoor unit of your Qlima Air Conditioner.
Why do both units of my Qlima Air Conditioner emit white mist?
When the Qlima Air Conditioner restarts in HEAT mode after defrosting, white mist may be emitted due to moisture generated from the defrosting process.
Detailed explanation of the function and usage of each button on the remote control.
Instructions on how to adjust the desired operating temperature for the air conditioner.
Explanation of how the automatic mode functions based on temperature.
Steps for cleaning the main indoor unit and its remote control.
Guide on how to clean or replace the air filters for optimal performance.
Lists common malfunctions, their causes, and solutions for troubleshooting.
General| Type | Split |
|---|---|
| SEER | 6.1 |
| Energy class (cooling) | A++ |
| SCOP | 4.0 |
| Energy class (heating) | A+ |
| Refrigerant | R32 |
| Cooling power (kW) | 2.6 kW |
| Cooling Capacity | 9000 BTU/h |
| Power Consumption | 0.8 kW |
| Operating Temperature | 16°C - 32°C |
| Noise Level | 52 dB |
| Dimensions (H x W x D) | 285 x 805 x 194 mm |
To Next Page
