Do you have a question about the Qlima S(C) 33xx and is the answer not in the manual?
Brand | Qlima |
---|---|
Model | S(C) 33xx |
Category | Air Conditioner |
Language | English |
Important warnings regarding installation safety, personal protection, and unit installation.
Crucial safety advice on earthing, earth leak switches, and proper drainage/piping work.
Lists accessories included for the SC 33xx models.
Lists accessories included for the S 33xx models.
Cautionary notes on condensation drainage and unit distance for installation.
Caution about feeding piping and cable during interior unit hanging.
Guidelines for positioning the indoor unit, including clearances and height.
Guidelines for positioning the outdoor unit, including clearances and leveling.
Advice on outdoor unit stability, wind protection, and installation bracket strength.
Options for routing piping from the interior unit to the exterior unit.
Instructions on how to mount the indoor unit's installation plate.
Details on drilling holes for piping, hose, and cable feed-through.
Guidelines and precautions for connecting/disconnecting coolant pipes for SC33xx models.
Steps for connecting coolant pipes for S33xx models, including flare nut and torque.
Advice on insulating copper lines and careful bending to prevent leaks.
How to connect the condensation hose to the indoor unit and ensure downward flow.
Steps for installing the drain joint on the outdoor unit for heating mode drainage.
Cautions regarding drain hose placement and slope for proper water drainage.
General requirements for electrical installation, including separate circuits and grounding.
Steps for connecting electrical cables between indoor and outdoor units for SC33xx models.
Steps for connecting electrical cables between indoor and outdoor units for S33xx models.
Instructions for connecting power supply cable, warning against using plugs for high current.
Evacuating the system must follow national regulations and be done by certified personnel.
Coolant leakage checks must follow national regulations and be done by certified personnel.
Methods for checking coolant leaks, including soap water and leak detectors.
Coolant pipe connection and refilling must be done by authorized fitters.
Procedures for test running the air conditioner after installation.