• Installing a QNAP drive adapter in another QNAP drive adapter is not supported.
Note
• The QDA-A2MAR has two M.2 SSD slots. For a list of compatible M.2 SSDs, go to
https://www.qnap.com/compatibility.
• QNAP recommends installing thermal pads on the M.2 SSD controllers to enhance
cooling efficiency and ensure consistent performance.
1. Remove the cover.
a. Remove the screws.
b. Lift the cover.
Tip
Use a Phillips #1 screwdriver.
2. Install thermal pads on the system board.
a. Remove the protective film from the thermal pads.
b. Apply the thermal pads to the system board.
Note
Single-sided M.2 SSDs have components (e.g., controllers, flash ICs) mounted only on the top
side, and double-sided M.2 SSDs have components mounted on both sides. Apply two thermal
pads for single-sided M.2 SSDs and one thermal pad for double-sided M.2 SSDs.
QNAP Drive Adapter User Guide
Hardware Installation 7
To Next Page
Loading...
