QNAP QSW-1208-8C User Manual

9
更多關於安全、法規，與環境法令遵循相關的資訊，請參閱以下網址 www.qnap.com/regulatory/。
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1. This device may not cause harmful interference.
2. This device must accept any interference received, including interference that may cause
undesired operation.
FCC Class A Notice:
This equipment has been tested and found to comply with the limits for a Class A digital
device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable
protection against harmful interference when the equipment is operated in a commercial
environment. This equipment generates, uses, and can radiate radio frequency energy,
and if not installed and used in accordance with the instruction manual, may cause harmful
interference to radio communications. Operation of this equipment in a residential area is
likely to cause harmful interference, in which case the user will be required to correct the
interference at his own expense.
Modifications: Any modifications made to this device that are not approved by QNAP Systems,
Inc. may void the authority granted to the user by the FCC to operate this equipment.
This device complies with CE compliance Class A.
According to the requirement of the WEEE legislation the following user information is
provided to customers for all branded QNAP Electronics products subject to the WEEE
directive.
This symbol on the product or on its packaging indicates that this product must not be
disposed of with your other household waste. Instead, it is your responsibility to dispose of
your waste equipment by handing it over to a designated collection point for the recycling of
waste electrical and electronic equipment. The separate collection and recycling of your waste
equipment at the time of disposal will help to conserve natural resources and ensure that it is
recycled in a manner that protects human health and the environment. For more information
about where you can drop off your waste equipment for recycling, please contact your local
city office, your household waste disposal service or the shop where you purchased the
product.

QNAP QSW-1208-8C Specifications

General

Combo SFP ports quantity	8
SFP+ module slots quantity	4
Basic switching RJ-45 Ethernet ports type	No
Basic switching RJ-45 Ethernet ports quantity	0
Switching optical modules type	-
Fiber ethernet cabling technology	10GBASE-LRM, 1000BASE‑LX, 1000BASE‑SX
10G support	Yes
Networking standards	IEEE 802.1p, IEEE 802.3, IEEE 802.3ab, IEEE 802.3ae, IEEE 802.3an, IEEE 802.3aq, IEEE 802.3az, IEEE 802.3bz, IEEE 802.3u, IEEE 802.3x, IEEE 802.3z
Copper ethernet cabling technology	10GBASE-T, 100BASE-TX, 1000BASE-T
Certification	CE, FCC, VCCI, BSMI RCM, CCC
Product color	Black
LED indicators	Activity, Link, Power, Speed, Status
Number of fans	2 fan(s)
Electromagnetic compatibility	CLASS A, UL62368
Throughput	120 Gbit/s
Jumbo frames	9000
MAC address table	32000 entries
Power source	AC
Output current	2.5 A
AC input voltage	100 - 240 V
AC input frequency	50 - 60 Hz
Power consumption (max)	50 W
Noise level	18.7 dB
Operating temperature (T-T)	0 - 40 °C
Operating relative humidity (H-H)	10 - 85 %
Package weight	2200 g
Switch type	Unmanaged
Harmonized System (HS) code	85176990

Weight and Dimensions

Depth	233 mm
Width	285 mm
Height	43 mm
Weight	2150 g