Do you have a question about the QNAP VIOSTOR NVR and is the answer not in the manual?
Provides a high-performance network surveillance solution for monitoring IP cameras, video recording, playback, and remote data access.
Essential safety precautions for operating and handling the NVR product.
Specifies the minimum system requirements for a PC used with the NVR.
Steps for initial system configuration, including Qfinder setup.
Steps to perform initial system setup and configuration.
Managing surveillance settings like administrator password and network.
Overview of the monitoring screen and its interactive controls.
Instructions for playing back recorded video files using the local display.
Steps to connect to the NVR monitoring page via web browser or QVR Client.
Explanation of the QVR Desktop components and features.
Details of icons and functions available on the monitoring page.
Explanation of buttons for manual recording, snapshots, audio, PTZ, and digital zoom.
Configuring display modes and using the PTZ camera control panel.
Using the QNAP QVR Client for Windows for remote monitoring.
Interacting with the playback page to search and play video files.
Overview and configuration of IP cameras, including adding and editing settings.
Activating and deactivating licenses for additional recording channels.
Managing hard drives, volumes, RAID levels, and disk health (S.M.A.R.T.).
Configuring IP addresses, subnet masks, gateways, DNS servers, and DHCP.
Registering NVR for remote access via myQNAPcloud service.
Troubleshooting steps for when the monitoring screen does not display.
| Category | DVR |
|---|---|
| Brand | QNAP |
| Model | VioStor NVR |
| Network Interface | Gigabit Ethernet |
| Dimensions | Varies by model |
| Recording Resolution | Up to 4K (model dependent) |
| Video Compression | H.264 |
| Video Output | HDMI, VGA |
| Remote Access | QNAP Mobile Apps |
| Mobile Support | Yes, via QNAP Mobile Apps |
| Storage Capacity | Depends on installed hard drives |
| RAID Support | Yes (specific levels depend on model) |