To Next PageTo Next Page
Need help?Do you have a question about the QNect SH-IPC02-QNE and is the answer not in the manual?
Press and hold the reset button for approximately 6 seconds. The LED will flash quickly.
Download the 'QNECT smart home' app, create an account, and follow the steps to add the device.
Avoid solvents or abrasives. Clean the exterior only with a soft cloth.
General| Image sensor | 1/2.7" CMOS |
|---|---|
| Video Compression | H.264 |
| Sensor Type | CMOS |
| Lens Type | Fixed |
| Field of View | 90° |
| Storage | MicroSD card (up to 128GB) |
| Power Supply | DC 5V/1A |
| Resolution | 2MP (1920x1080) |
| Wireless | Wi-Fi (IEEE802.11b/g/n) |
| Night Vision | Yes, IR LEDs |
| Connectivity | Wi-Fi |
