QNN Safe AH/B Series User Manual

QNN SAFE AUSTRALIA PTY LTD
ABN 47 168 078 233
Unit 9 / 376 Newbridge Road, Moorebank NSW 2170
Web site: www.qnnsafe.com.au
Email: info@qnnsafe.com.au
Phone: 02-87982669
Page 3 of 4
To set up: Press then Master Code / Supervisor Code then press then enter the
User Number (Could be from 3 to 7) then press , enter New User Code then press ,
enter New User Code again then press to confirm.
To delete: Press then Master Code / Supervisor Code then press then enter the
User Number the press
Changing Supervisor Code by supervisor:
Please keep the door at opening position during the whole processing until fully
ensure that the code is changed correctly.
For security reasons, please change to your own code after the first opening.
Your code can be set up to 10 digits
 Open the safe door
 Press then enter Supervise Code, then press . Orange light on with one beep.
 Press , press and then enter New Supervise Code then press
 Enter New Supervise Code again then press to confirm.
 Orange light on with one beep means the Master Code has been change successful
 Keep the door open, check and remember the code
Orange light off with two beeps means changing is fault. And the old Supervise Code is still
in place.
Changing User Code by user:
Please keep the door at opening position during the whole processing until fully
ensure that the code is changed correctly.
For security reasons, please change to your own code after the first opening.
Your code can be set up to 10 digits
 Open the safe door
 Press then enter User Code, then press . Orange light on with one beep.
 then enter New User Code then press
 Enter New User Code again then press to confirm.

QNN Safe AH/B Series Specifications

General

Brand	QNN Safe
Model	AH/B Series
Category	Other
Language	English