QNN SAFE AUSTRALIA PTY LTD
ABN 47 168 078 233
Unit 9 / 376 Newbridge Road, Moorebank NSW 2170
Web site: www.qnnsafe.com.au
Email: info@qnnsafe.com.au
Phone: 02-87982669
Page 2 of 2
Closing instructions:
Please know that the PERSONAL CODE used to lock the safe will be the same code for the
next opening.
Using current PERSONAL CODE: (Within 10 minutes after unlock the safe)
Push the door closed and press the “LOCK” key
“CLOSED” displayed with 2 beeps, then the door is locked
Using a new PERSONAL CODE:
Push the door closed
Input 4-6 digits new PERSONAL CODE and press the “LOCK” key
“CLOSED” displayed with 2 beeps, then the door is locked
Emergency Backup
In an emergency saturation, safe can be opened by the Emergency key. (Override the digital
lock). The key whole is located under the right hand side of the front panel, to expose the key
hole you need to remove the cover.
Then turn the master key counter clockwise to unlock the safe
You need to reset a new code after open the safe using Emergency Key
To reset the code:
Keep the Emergency key at counter clockwise position
Input 4-6 digits new PERSONAL CODE
Press the “LOCK” key, “CLOSED” then displayed with 2 beeps and then
displayed. which indicate that the code is set successful
Close and lock the door by removing the Emergency Key
Using the New Code to unlock the safe, and remember the code.
Other features:
Code hidden function:
To activate the function: Press “RESET” twice, then press the “LOCK” key
To de-activate: Repeat the above steps
Cautions:
Do not store the Emergency Keys and the External Battery Box inside the safe
When the “LO-BAY” display with 3 beeps, it means that the batteries need to be
replaced. Please replace new batteries as soon as possible
To Previous Page
Loading...
Need help?
General
