QNN Safe ZF II Series User Manual

QNN SAFE AUSTRALIA PTY LTD
ABN 47 168 078 233
Unit 9 / 376 Newbridge Road, Moorebank NSW 2170
Web site: www.qnnsafe.com.au
Email: info@qnnsafe.com.au
Phone: 02-87982669
Page 1 of 3
USER’S MANUAL FOR ZF II SERIES
FINGERPRINT SAFE
Serial Number:
This package contents:
 User manual
 2 Master keys
 1 External Battery Box
 2 Bolt Down Screws
M12mmx80mm
 4 AA Batteries
 2 Emergency back up Keys
Please contact your retailer or Qnn Safe Australia P/L if any shortage occurred
For the first time use, it needs the external battery power support:
 Insert the supplied 4 AA batteries into the External Battery Box
 Connect the power to the front panel. The power inlet is located at right hand side
of the panel.
After the safe is opened, please replace the batteries into the internal battery
box, which is located behind the door plate, please slid the box cover upward
or downward to open.
 Prepare the Master Key into the position
 Place any one of your fingers on the Reading Window, until a green light is on with two
beeps.
 Turn Master Key clockwise and turn the knob clockwise, safe now is unlocked.
( For some model, just turn the master key to unlock the safe)
This safe is operated by the Master Key and the Registered Fingerprint.
As factory default, there is no fingerprint be registered at this stage
Any person could open the safe with the Master Key.

QNN Safe ZF II Series Specifications

General

Brand	QNN Safe
Model	ZF II Series
Category	Safes
Language	English

Summary

Initial Safe Setup and Operation

External Battery Power Setup

Instructions for inserting AA batteries into the external box and connecting power to the safe for initial use.

First-Time Unlocking Procedure

Steps to prepare the Master Key and use a finger on the reading window to unlock the safe.

Fingerprint Management

Fingerprint Registering Instructions

Guide on how to register fingerprints using the setup button and reading window.

Deleting Registered Fingerprints

Procedure to restore factory settings by removing all registered fingerprints.

Safe Operation and Features

Opening Instructions by Fingerprint

Steps to unlock the safe using a registered fingerprint and the Master Key.

Closing Instructions

Steps to properly close and secure the safe after use.

Alarm System

Details on how the alarm is activated by movement and how to deactivate it.

Emergency Backup

Information on opening the safe using the master key in emergency situations.