QOLSYS IQ Water Valve User Manual

The IQ Water Valve is a retro fit servo that can operate 1/4 turn ball valves with pipes
from 1/2” to 1 1/4” and installs easily without the need for a plumber. It uses powerful
Z-Wave 700 for maximum range and reliability to the IQ Panel.
Features:
•
Easy to install, no plumber needed
•
Retrofit existing ball valves
•
Works with IQ Panel
•
Peace of mind from water leak
damage
•
Indoor/Outdoor (avoid direct
sunlight)
•
Z-Wave Plus 700 series
communication
•
Adaptive torque output max 8n.m
IQ WATER VALVE QUICK INSTALL GUIDE
SKU: QZ2160-840 (US) / QZ2160-724 (EU)
Dimensions: 14.8 x 9.6 x 13.3mm
Weight: 603g
Waterproof & Dustproof: IP66
Usage: For Indoor & Outdoor Water Valve On/Off
Operating Temperature: 14 ~ 122°F (-10 ~ +50°C)
Relative Humidity: 8% ~ 80%
Operating Distance: Up to 130ft (indoors) and 450ft
(outdoors)
Frequency Type :
Z-Wave Plus 700 series
908.4 MHz (US)
868.42 MHz (EU)
Motor Torque: Adaptive output max 8n.m
Touch Sense Button: x1
LED Indicator: 3 color LED (Green, Yellow & Red)
Sound Indicator: Buzzer (Max 85dB)
Power Supply AC-DC:
AC (110V 60Hz / 220V 50Hz)
DC (12V/1A)
SPECIFICATIONS
FEATURES & OVERVIEW
This is a quick guide for experienced installers only. Refer to http://dealers.qolsys.com (login required)
*Does not work on Gate valves. Be sure to check
the valve type of your water main prior to install

QOLSYS IQ Water Valve Specifications

General

Brand	QOLSYS
Model	IQ Water Valve
Category	Control Unit
Language	English

Summary

Product Features and Overview

Product Specifications

Installation Steps

Turn Off Water and Position Valve

Turn main water valve to off position and position IQ Water Valve over the handle.

Secure Thumb Screws

Press down firmly and tighten thumb screws, ensuring alignment with the water valve handle.

Connect Power

Plug the DC adapter into an outlet, securing the circular power jack with a water seal.

Pairing and Testing

Pairing with IQ Panel

Place panel in "Include" mode, tap touch button 3 times, select encryption, and add DSK or scan QR code.

Test Valve Operation

Tap touch button once to open and again to close the valve for calibration and function testing.

Outdoor Installation and Troubleshooting

Outdoor Install Considerations

Disable touch sense button outdoors to prevent rain activation; detailed steps for disabling/enabling provided.

Troubleshooting Common Issues

Covers LED status interpretation, factory default reset procedures, and manual force calibration steps.