Need help?Do you have a question about the Qonnect Q-TOOL N12XL and is the answer not in the manual?
The Q-Tool N12XL is suitable for all blind rivet nuts of sizes M3 to M12 for various material types.
Details the standard equipment and accessories included with the Q-Tool N12XL, and available conversion kits.
Provides key technical specifications for the Q-Tool N12XL, including weight, stroke, drive, and pull force.
Lists Qonnect part numbers for the Q-Tool N12XL and associated components, with corresponding figure references.
Step-by-step guide on how to install the correct mandrel and anvil before operating the tool.
Explains how to activate the tool, the LED indicator, and how to reset the day count quantity.
Details how to adjust the stroke length using the control panel for optimal blind rivet nut setting.
Describes the two available working modes: manual and automatic, and how to select them.
Explains how to activate and deactivate the lock function to prevent accidental changes to settings.
Guides on how to set a blind rivet nut, including hand-fitting and trigger operation.
Instructions on using the reverse button to unblock or reverse the mandrel in case of jamming.
Provides technical specifications for the battery and charger, including weight, voltage, and capacity.
Details safe practices for charging the battery and important handling precautions.
Describes that maintenance is limited to replacing anvils and mandrels, referring to starting instructions.
Advises on keeping the tool in good condition, regular maintenance, and contacting dealers for repairs.
Outlines the 12-month warranty coverage for the riveting tool, excluding battery and consumables.
Declares conformity with relevant European standards for the battery-driven riveting tool.
General| Category | Power Tool |
|---|---|
| Model | Q-TOOL N12XL |
| Voltage | 12V |
| Battery Type | Li-Ion |
| Max Torque | 30 Nm |
| Chuck Size | 10mm |
To Next Page