2
Programming
Set the Clock
Press the SET button until you see the clock is blinking. Press +/- button to
change the clock. Press START button to save the change.
Plan your feeding schedule
Set Feeding Schedule
Press the SET button until you see the Schedule window is blinking. Press +/-
button to change the time. Press SET again to set the 2
nd
meal, minimum of 30
minutes between meals. You can set up to 6 meals in one day. Press START
button to save the change. The feeding schedule will repeat every day until you
change it or turn it off.
For feeding only 1 meal a day, you can use the feeder for six consecutive days
like this
For feeding 2 meals a day, you can use the feeder for three consecutive days like
this
For feeding 3 meals a day, you can use the feeder for two consecutive days like
this
You can use the +/- button to review the schedule after you finish the setting.
Record Personal Voice
Press PLAY/REC and hold for 3 second, you will be able to record your personal
voice for up to 10 seconds.
Press PLAY button to review the recoding. It will play automatically when feeding
schedule arrives.