QPlay RITO - Safety Surround and Canopy Installation; Push Bar Handle and Canopy Peak Installation; Folding the Trike; Folding Procedure Steps

Next pull down the safety surround bar Insert the canopy (D1) onto the frame (A)
Insert the push bar handle (G) into the push bar on
the backrest (B). You should hear the jump bead
pop into its position.
Next zip on the canopy peak (D2) onto the
main canopy (D1)
Assembly Instructions
Follow the instructions step by step Special folding mechanism makes it convenient for traveling
Folding the Trike
G
B
B
D1
D1
D2
STEP 9
STEP 11 STEP 12
STEP 10
1. Press and hold the red reclining
button on the back of the backrest
and pull up to recline the seat. Then
pull back the canopy to the parent
push handle.
4.Stand the trike upright 5. Fold up the middle foot rest and then remove the
strap and fasten the body of the trike
2. Loosen the lock wrench for the
parent handle located at the bottom
of the push bar. Then press the
black button on the frame
3. Press the red button on the
front and fold the handlebar
down to fold it forward.