QPS Que! Drive - Software Installation

Using Your Adaptec Toast Software
To start Adaptec Toast USB 4.0.1.1:
• Click twice on the HDD icon and open the Toast Folder
• Click twice on Adaptec Toast to launch the program
Audio Recording
• Open Toast 4.0.1.1.
• Select the Format menu
• Select “AUDIO CD” from drop down menu
• Insert an audio CD into your computer systems’ CD ROM player
• The Audio CD icon will appear on your desktop
• Drag the Audio CD icon from the desktop to the Toast Window
• Click on the “Audio” button (the audio track window will open)
• Highlight a track or select all the tracks at once
• Click on the “extract to.” button
• Select the “D e s k t o p” buttton (If “Desktop” appears on the menu bar just click on
save)
• After the extraction is done highlight all the tracks you wish to have written to the new CD
• Select “Save”
• Select the “Done” button
From the main window of Toast:
• Click on “S e a r c h ...” (The drive should be identified as a Mitsumi 4804TE USB: QPS Drive)
• Click on “Write CD”
• Insert a blank CD-R or CD-RW media
• Close the Que! Drive tray
• Set the write speed to 2X
• Click on the “Write Disc...” button
Note: Writing Audio CDs at 2x speed is a recommended with the USB interface.
16
Mac Installation