QSC DPM 100 - Controls and Connectors; Front Panel Overview

3
TD-000515-01-D
Controls and Connectors
Front Panel
— Figure 1 —
2 3 4 5a 5b 6 7 8 9 10 11
12
1
1. Full-range monitor speaker
2. MONITOR VOLUME – Function depends on operating mode
a. Monitor mode – controls level to DPM front panel loudspeaker
b. Setup mode – provides parameter adjustment
3. SETUP mode indicator LED – illuminates yellow when Monitor
Volume knob is in setup mode
4. 128 x 64 bit LCD monochrome display
5. Navigation
a. – press to navigate to a higher level menu
b. – press to navigate to a lower level menu or edit a parameter
6. MASTER MUTE button – Mutes all outputs when engaged
7. MASTER MUTE LED – illuminates red when Mute is engaged
8. MASTER VOLUME knob – global level control for all audio outputs
9. FAULT LED – illuminates yellow when load faults or system errors
are detected
10. POWER LED – illuminates green when AC power is applied
11. – Headphone jack (3.5 mm TRS) for attaching external powered
monitor speaker or headphones (automatically mutes speaker)
12. USB Type B port for DPM configuration and management.