QSee Q-Go - User Manual

To Next Page

Manual

Introduction

Technical Speciﬁcations

Controls and Features Setup

Thank you for your purchase of Q-See’s Q-Go HD vehicle

camera. Please enjoy the conﬁdence and security provided

by this automated impartial witness as well as the pleasure

offered by being able to safely record a trip along your favorite

stretch of highway in full 1080p high deﬁnition.

This camera offers a number of features which allow it to

best meet your needs. Please read this entire manual before

operating your camera and retain it for later reference.

Charge Battery

To set up your Q-Go HD, use the included car charger. Or,

use the included USB cable to connect to a powered USB

port on a computer or 5V USB charger (not included). The

camera will power on as soon as it has power and will begin

charging its internal battery. The battery will hold a 10-15 min-

ute charge, so it is important to keep the camera plugged in.

Low Power

Fully Charged

Install microSD Card

The Q-Go HD supports microSD cards up to 32GB in size.

Use a Class 10 card for best results.

Power On/Off

The Q-Go HD will turn on and begin recording as soon as it

is connected to power, such as when it is connected to the

car charger and the ignition is turned on. It can be turned on

by pressing and holding the Power button for 1 second. The

Power/Recording Indicator LED will glow a steady pink. An

alternating red/pink indicator shows that the camera is record-

ing video. To turn off the camera, press and hold the Power

button for 3 seconds.

Microphone

IR LEDs (4)

Speaker

A/V Output

LED Monitor

Down

Mode

HDMI Output

Lens

USB

On/Off

Record/OK

Reset

Power/

Recording

Indicator

Red=Off, Charging

Pink= On, Charging

Pink/Blue = On,

Recording

microSD

Memory Card

Slot

Attachment

Point for Bracket

• Insert the card as shown. Do not force

the card or insert it improperly or you

may damage your camera.

• When the card is inserted, the camera

will overwrite any existing data.

• Press gently on the card to cause it to

pop out for removal.

Screen: 2.7” 4:3 TFC LCD

Lens: 140° super wide

Languages: English, French, German, Italian, Japanese,

Portuguese, Russian, Spanish, Chinese

(Simpliﬁed/Traditional)

Video Size: 1080p/720p/480p

Video Format: AVI

Photo Resolution: VGA, 3MP, 5MP, 8MP, 12MP

Photo Format: JPG

Shooting Modes: Single, Self Timer (2, 5, 10 sec), Continuous

TV Output: NTSC/PAL

USB Port: USB 2.0

Power Supply: 5V 500mA

Battery: Built-in (063525PL)

Supported OS: Windows 2000/XP/Vista/7,8,10

Macintosh 10.3.6 or above

Need help?

Do you have a question about the QSee Q-Go and is the answer not in the manual?

Summary

Introduction to Q-Go HD Dashcam

Technical Specifications of Q-Go HD

Setup and Configuration

Charging the Battery

Instructions on how to charge the internal battery using the car charger or USB cable.

Installing the microSD Card

Guidance on inserting a microSD card up to 32GB, recommending Class 10 for best results.

Powering On and Off

Details on how to turn the camera on by connecting power or holding the power button, and how to turn it off.

Setting the Date and Time

Steps to access the setup menu and correctly set the date and time for accurate recordings.

Configuring Loop Recording

How to adjust the video recording increment length or disable loop recording entirely.

Additional Video Functions

Instructions on using zoom and switching to night mode with infrared LEDs.

Special Features Overview

Snapshot Mode

Guide to switching to photo mode, zooming, and capturing still images.

Playback Mode

How to navigate, play, delete, or protect video and photo files.

File Backup Procedures

Video Playback on a TV

Online Support Resources