Why QSee DVR is not recording?
If you cannot record with your QSee DVR, the HDD might not be formatted, so format it manually first. The record function might not be enabled or set up correctly. The HDD might be full, and the recycle function is not enabled. The HDD might be damaged and require replacement.
Why won't my QSee DVR turn on?
If your QSee DVR doesn't start after connecting the power, the power adapter might be damaged or not providing enough power. Try changing the adapter. It's also possible the DVR isn't getting enough power from the outlet or surge protector, or there could be an issue with the system board.
What to do if QSee DVR indicator lights are on but there is no output?
If your QSee DVR indicator lights are on, but there's no output, the power adapter may be damaged or not providing enough power, so try changing it. The video format of the DVR might also differ from that of the monitor. Also, check the cable and ports of both the monitor and DVR to ensure they are properly connected.
Why QSee QT4516 DVR cannot find hard drive?
If your QSee DVR cannot find the hard disk drive, it might be due to the power adapter not providing enough power or not getting enough power from the outlet. Check the power and data cables on the HDD to ensure they are properly connected. It's also possible that the HDD is damaged and needs replacement.
What to do if QSee QT4516 DVR displays 'please wait'?
If your QSee DVR starts and displays 'please wait……' all the time, check the hard drive power and data cable connections to ensure they are secure. If it's still not working, unplug them and plug them in again. You can try reformatting or replacing the hard drive. Also, try connecting the DVR to a different surge protector and power outlet.
General| Model | QT4516 |
|---|---|
| Recording Resolution | Up to 1080p |
| Compression Format | H.264 |
| Operating System | Embedded Linux |
| Network Interface | RJ45 |
| Video Input | 16 channels |
| Hard Drive Support | Up to 6TB |
| Network Protocol | TCP/IP |
| Power Supply | DC 12V |
| USB Interface | 2.0 |
| Operating Temperature | -10°C to 55°C |
To Next Page
