To Next PageTo Next Page
Need help?Do you have a question about the QTech EZ-60 and is the answer not in the manual?
Install the platter, connect the AC adaptor, and charge the scale for at least 10 minutes.
Learn about battery life, low battery indicators, and automatic power-off features.
Position the scale on a level surface and adjust feet to ensure stability.
Use only QTech adaptors and follow tips for consistent, accurate results.
Understand how the scale counts coins by weight and the initial setup process.
Select coin denominations and learn to tare the container for accurate counts.
Steps for counting coins, managing overload, and canceling tare operations.
Procedures for initiating and adding counts to the running subtotal.
How to recall the accumulated subtotal and clear it from memory.
Steps to program keys 7, 8, or 9 for custom coin or token counting.
Enter token weights and test programmed keys for accuracy.
Advice on resetting the scale, using surge protectors, and power management.
Identifies factors leading to inaccurate counts, such as non-uniform items.
Discusses how drafts, tare weight, and altitude can impact counting accuracy.
Provides the phone number for technical support.
General