6
Operating the Scale in a Draft: An air draft can affect the scale's accuracy. Avoid using the
scale near any source of moving air: fans, air conditioners, heaters, or a draft from an open
window or door.
A Tare Weight is present: The display windows should read “0” before use. If you used the
tare feature, there will be a negative count (weight) stored in the scale’s memory. To delete the
tare weight remove the container from the scale platter and press the Z Key. Note that you can
not mix different containers used to count coins unless they weigh the same.
High or low Altitude: Altitude variations above or below sea level can affect the accuracy of
your counts. Call us and we will provide a technique for improved results.
Require Support?
Call: 1-800-831-4175
To Next Page
Loading...
General