7
3.3 Changing the password:
Step Keys to press Display Explanation
1
PROG PASSWORD:***
Begin the edit program mode
2
0 0 0 PASSWORD:*** Default Password “000”
3
ENT OPEN:??
Enter into editing mode
The first two digit file number (01-99)are
allowed for naming message files[CYCLIC]
4
01 ENT [CYCLIC]
Is the default method of display code which
means to cycle through at random
CPW UNUSE PASS
Press ENT to turn password off
PREV / NEXT RES PASS
Reset password to DEFAULT 000
5
PREV / NEXT USE PASS
If you are currently not using the password
feature use this option to turn it on
6
PREV / NEXT CHANGE ***
Use this option to enter a new 3 digit
password
XXX ENT CHANGE ***
Enter new password
6
XXX ENT AGAIN ***
Confirm new password
7
PROG PASSWORD:***
Next time you enter in to program mode use
your new set password
3.4 Setting the Date, Time or Alarm:
Step Keys to press Display Explanation
1
PROG PASSWORD:***
Begin the edit program mode
2
0 0 0 PASSWORD:*** Default Password “000”
3
ENT OPEN:??
Enter into editing mode
TIME SET TIME
Press ENT and use the arrow keys to set
the correct time
5
PREV / NEXT SET DATE
Press ENT and use the arrow keys to set
the correct date
PREV / NEXT ALARM
Set number of times for Alarm to be
activated “C” and the time interval between
each alarm.
PREV / NEXT ONE HOUR
Alarm will go off every hour
PREV / NEXT 12H Mode 1
Displayed as EG: WED 06:00 PM
PREV / NEXT 12H Mode 2
Displayed as EG: WED 06:00
PREV / NEXT 24H Mode
Displayed as EG: WED 18:00
PREV / NEXT ADD TIME
Add the current time
PREV / NEXT ADD DATE
Add the current date DD-MM-YYYY
PREV / NEXT ON TIME
Set a time when the sign turns on
automatically
6
PREV / NEXT OFF TIME
Set a Time when the sign turns off
automatically
To Next Page
Loading...
General