6
NOTE: You can change the Font Style, Speed, Pause time and Colour by simply
pressing ALT and the selected option before you type you message EG:
[CYCLIC][5x11][GREEN][PAUSE1]WELCOME[CYCLIC]
To make words display in different frames or one after the other press ENT to display
type as follows:
[CYCLIC][5x11][GREEN]WELCOME[CYCLIC][5x11][RED]TO[CYCLIC]SHOP
NAME[CYCLIC]
This will display the three words differently one after another
To erase a program press CLR then ENT to delete the program and start again
3.2 Inserting text, time, date, symbol, graphics or characters
:
Step Keys to press
Display Explanation
1 PROG PASSWORD:*** Begin the edit program mode
2 0 0 0 PASSWORD:*** Default Password “000”
3 ENT OPEN:?? Enter into editing mode
The first two digit file number (01-99)are
allowed for naming message
files[CYCLIC]
4 01 ENT [CYCLIC]
Is the default method of display code
which means to cycle through at random
5 ALT SYM Add a Symbol
6 ALT FONT Change the font size
7 ALT COL Change the colour of the font
8 ALT PAU Add a pause on each section
9 ALT SPE Slow the scroll speed
10 ALT GRA Add a graphic to the text.
11 TIME
Use PREV / NEXT to
select the pre option
you want. More
details of these can
be found in
Appendix A
ADD TIME / ADD DATE
RUN
12
Y ENT
SAVE Y / N Confirm selection
For more details of what each option has to offer is available see Appendix 1
To Next Page
Loading...
General