Qtx ADMX-512 User Manual

www.avsl.com 154.105UK User Manual
ADMX-512
512 Channel DMX/RDM Controller
Item ref: 154.105UK
User Manual
A powerful 512 channel DMX/RDM controller with 32 fixtures. Each fixture controls up to 32 channels per
unit. There are 32 storable scenes and 32 storable chases, each with up to 100 steps which can be
triggered manually, by sound or automatically using the time faders between 0.1 seconds and 10 minutes.
An integrated USB port provides back up of up to 16 banks of DMX settings, scenes and chases on an
attached USB storage device. The hardwearing metal chassis can be used standalone or 3U rackmount if
preferred and the detachable carry handle makes the unit easy to move from event to event.
In the box:
Your ADMX-512 should arrive with you in a single carton in good condition. The carton should contain
1 x main unit, 1 x UK power adaptor and 1 x user guide.
Controls Overview:
Please read through this manual thoroughly before use, any damage
caused by misuse of product will not be covered by warranty.
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
18.

Qtx ADMX-512 Specifications

General

Brand	Qtx
Model	ADMX-512
Category	Controller
Language	English

Summary

ADMX-512 Controls Overview

Channel Faders and Number Buttons

Details on faders for DMX values and number buttons for functions.

Navigation and Mode Selection Buttons

Explanation of PAGE, FIXTURE, MOVEMENT, SCENE, CHASE, and RUN MODE buttons.

Data Wheels, USB, and System Control

Covers PAN/TILT wheels, USB ports, REC/ENTER, MENU/ESC, and BLACK OUT/DEL buttons.

Physical Connections and Power

Details on Power Input/Switch and the DMX Connection port.

Setup and Basic Operation

Initial Setup Procedure

Steps for connecting power, DMX, and powering on the controller.

Manual Scene Adjustment

Guide to adjusting DMX values for scenes using faders and wheels.

Scenes with Movement and Color Effects

How to add movement patterns and color effects to scenes.

Scene and Chase Management

Memorizing Illumination Scenes

Step-by-step process for saving scenes to memory banks.

Calling and Adjusting Illumination Scenes

How to recall scenes and adjust fade-in times for color channels.

Programming and Playing Chases

Guide to creating, memorizing, and running chase sequences.

System Configuration and Settings

DMX Addressing and Channel Assignment

Manual setup of DMX start addresses and channel softpatching.

System Setting Options Overview

Lists available system adjustments like reset, data, and fade mode.

RDM, Data Management, and Updates

Setting up RDM, device management, data backup/load, and firmware.

Blackout Mode and Specifications

Configuring blackout behavior and viewing device specifications.