Need help?Do you have a question about the QUAD FM3 and is the answer not in the manual?
General| Type | FM Tuner |
|---|---|
| Frequency Range | 88 - 108 MHz |
| Signal to Noise Ratio | 70dB |
| Weight | 3.5 kg |
| Output | 775 mV |
| Distortion | 0.3% |
| Frequency Response | 30 Hz - 15 kHz (+/- 1 dB) |
| Stereo Separation | 40dB |
| Power Supply | 240 V AC, 50 Hz |
General guidelines for achieving specified performance during alignment.
List of necessary test equipment for the alignment procedure.
Details on color coding of ceramic filters for identification.
Information on adjusting HT voltage on earlier models.
IF alignment steps for units prior to serial number 10,000.
IF alignment steps for units from serial number 10,000 onwards.
RF circuit alignment for units prior to serial number 10,000.
RF circuit alignment for units from serial number 10,000 onwards.
Procedure for adjusting the noise sensing coil L4.
Decoder alignment steps for units prior to serial number 5885.
Decoder alignment steps for units from serial number 5885 onwards.
Setup and connections for the first part of Alignment Procedure 2.
Discriminator alignment procedures and control settings.
Decoder alignment procedures and signal checks.
Modifications made to the RF board across different serial number ranges.
To Next Page
