5700 ACT Wood Stove
OPACITY
BURN RATES
• STARTING FIRE:
• HIGH:
After a wood load has been burning for 5 to 15 minutes on High to achieve the following burn rates
set the controls as listed below:
• MEDIUM HIGH:
• MEDIUM LOW
• LOW:
BLOWER OPERATING INSTRUCTIONS
Initial (cold) start-up:
High burn setting:
Medium or Medium-High burn setting:
Low burn setting
OPERATING INSTRUCTIONS (Cont’d)
CAUTION: DO NOT STORE WOOD CLOSER THAN THE REQUIRED CLEARANCES TO COMBUSTIBLE OF THE STOVE OR
WITHIN THE SPACE REQUIRED FOR LOADING AND ASH REMOVAL
WOOD SELECTION AND STORAGE
To Next Page
