Page 13
SIMPSON DURA-VENT PARTS LIST (CONT.)
BASIC KITS
The standard termination kit (Kit 0970A) includes the following:
990B 1 each 90° Black Elbow
940 1 each Round Ceiling Support/Wall Thimble
985 1 each High Wind Horizontal Termination Cap
NOTE: The above kit is not a complete termination system. You will need to order the
straight pipe lengths needed to complete the installation. The black 45° elbow is
not included in this kit.
The standard termination kit (Kit 0971HW) includes the following:
990B 1 each 90° Black Elbow
940 1 each Round Ceiling Support/Wall Thimble
985 1 each High Wind Horizontal Termination Cap
904B 1 each 24” Black Pipe
911B 1 each 11” - 14 5/8” Black Adjustable Pipe
The vertical termination Kit (Kit 973) includes the following:
943 1 each Flashing 0/12 - 6/12
953 1 each Storm Collar
991 1 each High Wind Vertical Termination Cap
NOTE: The support box is not included in this kit.
CAUTION: IF DURA-VENT HORIZONTAL OR VERTICAL TERMINATION KITS DO NOT HAVE
HIGH WIND TERMINATION CAPS THIS APPLIANCE WILL NOT WORK PROPERLY.
To Next Page
Loading...
