8
Customer Helpline 08456 400 800
Donotconnectthebatteryand/ortheisolatorkeybeforetheproductiscompletely
assembled.
Some models have the handles partially fitted inside the box. In this case unfold the handles and
tighten the 4 fasteners.
If handles are no pre-assembled, proceed as follows:
• Fit the handle base to the deck with the bolts, washers and fasteners
• Ensure that the cable clips supplied are used to fix the cable to the handle.
Step 1 - Handle Base Assembly
Assembly
2 3
To Next Page
Loading...
