04
Helpline No. UK 0151 649 1500 / IRE 189 094 6244
Maintenance and storage:
n Make sure that all nuts, bolts and screws are
tightened securely at all times to ensure that the
machine is in a safe working condition.
n Never store the machine (with petrol in the tank)
inside a building in which petrol fumes could
come into contact with open flames or sparks.
n Allow the engine to cool before you put the
machine in an enclosed area.
n In order to avoid fire hazards, keep the engine
and exhaust free from all vegetation matter and
leaking grease (oil).
n For your own safety, replace worn or damaged
parts without delay;
n If the tank needs to be emptied, ensure that it is
done out in the open.
Screw fitting sizes
14(x 4) = 20mm
19(x 1) = 80mm
21(x 5) = 35mm
13(x 4) = 30mm
0mm 10mm 20mm 30mm 40mm 50mm 60mm 70mm 80mm
To Next Page
Loading...
Need help?
General