Maintenance
- Open the appliance door.
- Remove the safety plug from the fryer tap.
- Place the silicone hose on the tap.
- Place the bucket on the ground and place the funnel with the lter
inside it.
- Open the tap’s red safety key.
- Check the level of the ltered oil and, if necessary, ll up to 5.5 litres,
with new oil.
- To see the oil in the fryer, turn on the machine. the hatch will open
automatically if you have enabled the sensor or oat. If not, you must
press the “open” button. Once you are sure that the hatch is
open, place the funnel in the product entry hopper, then attach
the bucket to the side of the spout so that the oil will fall into the
fryer.
5757 EN
To Next Page
Loading...