Maintenance
the top of the basket.
- Unscrew the three (3) ywheels that adjust the output ramp, then pull
outward to remove the ramp from the frying basket.
- Turn the paddle upwards and pull to remove it.
- Remove the blade from the bucket by pulling it towards the inside of the
fryer vat.
- Take the basket at both ends and pull upward to remove it from the fryer
vat.
- Carefully pull the heating unit upwards to take it out of the tank.
** Wash only the resistance, being careful not to bend or modify the
position of the temperature probe, the oat or the thermostat. Do not
put in the dishwasher.
** All the parts can be washed in the sink or in the dishwasher.
(Except for the heating unit).
6161 EN
To Next Page
Loading...