quanergy M8 - Procedures; Connect Single Sensor to the GPS Receiver; Figure 45. NMEA;PPS Signals Synchronized on Single Sensor

M8 Sensor User Guide, QPN 96-00001 Rev K Page 71
Procedures
Step through the next few illustrations and procedures to get the M8 system to fully
cooperate with the Global Positioning System (GPS) unit and enable the Coordinated
Universal Time (UTC) timestamp.
Connect Single Sensor to the GPS Receiver
Figure 46 illustrates the sending of the NMEA sentence and PPS signal from the GPS
receiver to a single sensor.
Figure 45. NMEA/PPS Signals Synchronized on Single Sensor