QuanSheng TG-45UV User Manual

USER'S MANUAL

QuanSheng TG-45UV Specifications

General

Brand	QuanSheng
Model	TG-45UV
Category	Two-Way Radio
Language	English

Summary

Safety and Usage Precautions

LCD Display and Basic Operation Controls

Basic Operation Controls

Fundamental controls like PTT, CALL, MON keys, and Band key.

Basic Operation Keypads and Switches

Menu Operations: PTT ID to Scan Resumed Mode

Dual-watch and Keypad Sound

Setting dual watch and audible keypad feedback.

Time-Out-Timer and DCS/CTCSS

Configuring transmission limits and privacy codes (DCS/CTCSS).

Voice Reminding, ANI-ID, DTMFST, Signal Code

Settings for voice prompts, identification codes, DTMF, and signal codes.

Scan Resumed Mode and PTT ID

Configuring scan behavior and PTT-ID transmission.

Menu Operations: Channel Display to Mute Mode

Channel Display Modes and Lock Functions

Frequency Offset and Channel Store/Delete

Backlight, Alarm, and Optional Signaling

Menu Operations: Tail Tone to Reset

Tail Tone Elimination Settings

Power On Display and Call End Tone

Function Operation: VOX and Dual-watch

VOX Function Operation

Voice-activated transmission for hands-free operation.

Wide/Narrow Bandwidth Operation

Auto Backlight Operation

Dual-watch Operation

Function Operation: Squelch and Battery Saving

Squelch Level Operation

Adjusting the noise squelch threshold for clear reception.

Step Frequency Operation

Output Power Operation

Selecting high or low output power for transmissions.

Battery Saving Operation

Optimizing battery life during standby.

Function Operation: Keypad Sound, TOT, and Privacy Codes

Keypad Sound Reminding Operation

Time-Out-Timer Operation

Receiving DCS Operation

Setting DCS codes for private reception.

Receiving CTCSS Operation

Setting CTCSS codes for private reception.

Function Operation: Transmitting Codes and Identification

Transmitting DCS Operation

Setting DCS codes for private transmissions.

Transmitting CTCSS Operation

Setting CTCSS codes for private transmissions.

Voice Reminding Operation

ANI-ID Operation

Function Operation: DTMFST, Signal Code, and PTT ID

DTMFST Operation

Signal Code Operation

Scan Resumed Mode Operation

PTT ID Operation

Function Operation: PTT ID Prolong Time and Channel Lock

Channel Display Mode Operations

Busy Channel Lock Operation

Function Operation: Keypad Lock and Frequency Settings

Auto Keypad Lock Operation

Frequency Offset Direction and Deviation

Setting transmit/receive frequency offset direction and deviation.

Channel Store Operation

Function Operation: Channel Delete and Standby Backlight

Channel Delete Operation

Standby Backlight Operation

Function Operation: Backlight and Alarm Modes

RX and TX Backlight Operations

Alarm Mode and Optional Signaling

Function Operation: Mute Mode and Tail Tone Elimination

Mute Mode Selection

Tail Tone Elimination Settings

Managing tail tone elimination for normal and repeater use.

Function Operation: Power On Display and Reset

Displays When Power On and Call End Tone

Dual-watch Operation and Reset

Function Operation: Initialization, Keypad Lock, and FM Radio

Radio Initialization and Keypad Lock

Initializing radio settings and manually locking/unlocking the keypad.

FM Radio and Rapid Alert Functions

Listening to FM radio and activating the rapid alarm function.

Function Operation: Stun/Kill/Revive and Call Functions

Stun/Kill/Revive Operation

Remotely controlling radio status (receive-only, transmit-forbidden).

Single call/Group call/Troop call

Making individual, group, or troop calls via DTMF.

Function Operation: Call Control Details

Call Control in Channel Mode

Performing single, group, or troop calls in channel mode.

Automatic Call Activation

Activating calls via signal code and PTT press.

Function Operation: Advanced Call Control Setup

Call Control Setup and Parameters

Setting up call control parameters via PC software and menus.

Automatic Call Control Activation

Activating single, group, or troop calls automatically.

Radio Specifications