Item Description
PEF# Number of PEF configuration entry. There are 40 PEF configuration entries in the system.
Event Filter Action Show the doing action when the event occurs.
Sensor Type Display the sensor type.
Sensor Num Display the sensor number.
Event Trigger Show the threshold type to cause the event occurs.
1. Modify PEF
Change the attributes, and click the Save button to save any changes. If you want to cancel this action, click the Cancel
button to return to PEF list page.
Item Description
Event Filter Action
Check/uncheck the Alert box to enable/disable alert occurs.
You can select one of power operation. If event occurs, the power action will perform.
No Power Action
Power Down
Reset
Power Cycle
Alert Policy Num Choose the alert policy number of the Alerts List.
Sensor Type Select the sensor type
Sensor Num Enter the sensor number.
Event Trigger
Choose the event trigger type.
Any: choose all event trigger type
Select: not choose all event trigger type
Filter Enable/Disable Check/uncheck this box to enable/disable this filter.
Chapter 5 — ESMS
134
Modify PEF of PEF web
To Next Page
Loading...
