SETUP submenu: Server
*1: Disabled/Enabled
*2: Disabled/Enabled
*3: Power Off/Power On/Last State
*4: Disabled/Correctable/Uncorrectable/Fatal
Control Group User Access Level
Set BMC LAN Configuration Access Level 3
Remote Access Configuration Access Level 3
Restore on AC Power Loss Access Level 1
View BMC System Event Log Access Level 3
Clear BMC System Event Log Access Level 1
Event Logging Access Level 1
ECC Event Logging Access Level 1
PCI Error Logging Access Level 1
QPI Error Logging Access Level 1
IOH Internal Error Logging Access Level 1
NMI on Error Access Level 1
46
Chapter 3 — BIOS
Main Advanced Boot Server Security Exit
Configure Remote Access.
←→ Select Screen
↑↓ Select Item
Enter Go to Sub Screen
F1 General Help
F10 Save and Exit
ESC Exit
IPMI Configuration
----------------------------------------------------
Status Of BMC Working
IPMI Specification Version 2.0
BMC Firmware Version 00 00.01
► Set BMC LAN Configuration
► Remote Access Configuration
Restore on AC Power Loss [Power On]*3
Event Control Interface
----------------------------------------------------
►View BMC System Event Log
Clear BMC System Event Log
Event Logging [Enabled] *1
ECC Event Logging [Enabled] *1
PCI Error Logging [Enabled] *1
QPI Error Logging [Enabled] *1
IOH Internal Error Logging [Enabled] *1
NMI on Error [Fatal]*4
BIOS Setup Utility
v02.66
To Next Page
Loading...
