Quantum Audio QPX2000.4 - Features and Benefits

AMPLIFIER
3 12
The Quantum: QPX2000.1M, QPX2500.1D, QPX3000.1D, QPX4000.1D
and QPX5000.1D are equipped with a built in variable lowpass crossover network
allowing you to select the crossover function and frequency for each the front
channels or rear channels of the amplfier independently.
The Quantum QPX2000.4, QPX2800.4 and QPX1200.2 are equiped with a built
in variable crossover network allowing you to select the crossover function and frequency
for each the front channels or rear channels of the amplfier independently.
Features and Benefits
Master & Slave RCA Connection
PROTECT
POWER
REMOTE
PHASE LEVEL
LOW
PASS
SUB
SONIC
BASS
BOOST
INPUT
L
R
SLAVE
IN
MASTER
OUT
SLAVE
IN
MODE
MASTER
OUT
0° 180° 25Hz 250Hz 15Hz 55Hz 0dB 12dB MIN MAX
Crossover Controls
4000.1D Monoblock Amplifier
Caution
can handle such a large amount of power.
QLink lnput Connection
Monoblock Amplifier
QLink Power and Speaker Connection “MASTER UNIT”
To “MASTER SLAVE” Amplier
PROTECT
POWER
REMOTE
PHASE
LEVEL
LOW
PASS
SUB
SONIC
BASS
BOOST
INPUT
L
R
SLAVE
IN
MASTER
OUT
MODE
MASTER
OUT
0° 180° 25Hz 250Hz 15Hz 55Hz 0dB 12dB MIN MAX
Crossover Controls
4000.1D Monoblock Amplifier
PROTECT
POWER
REMOTE
PHASE
LOW
PASS
SUB
SONIC
BASS
BOOST
INPUT
L
R
SLAVE
IN
MASTER
OUT
SLAVE
IN
MODE
0° 180° 25Hz 250Hz 15Hz 55Hz 0dB 12dB
Crossover Controls
4000.1D Monoblock Amplifier
Wired
4000.1D
Monoblock Amplifier
GNDREM+12V
INPUTPOWER
OUTPUTSPEAKER
4000.1D
Monoblock Amplifier
GNDREM+12V
INPUTPOWER
OUTPUTSPEAKER
When utilizing the dual amplier conguration it is important to
note that the connected speaker load can be no lower than 2 Ohmns.
Connecting a lower impedance load impedance
load can demage the amplier and void your warranty.
TO REMOTE turn on.
Ω
2 8
“SLAVE UNIT”
Use 8 Gauge ( AWG ) wire cable