780 Handheld Test Instrument Page 5
2 Physical Interfaces of the 780 Handheld Test Instrument for HDMI
This section describes the administration, video and audio interfaces on the 780 test instrument:
2.1 Video Interfaces
The following table describes the video interfaces on the 780 test instrument, these interfaces are used to render test
patterns for testing consumer electronic HDTVs and computer displays.
Table 2-1: 780 Video Interfaces
Single link HDMI output connector. Supports HDMI 1.3:
Bit Depth: 24/30/36 bit.
Colorimetry: RGB, YCbCr.
Sampling: 4:4:4 and 4:2:2.
Pixel rate: Timings up to 1080p60.
DVI support through HDMI to DVI adapter cable (RGB, 4:4:4,
24 bit).
Audio: LPCM, Dolby Digital and DTS (more details below).
Analog Output – Component and VGA
(HD15F)
Bit Depth: 24 bit color depth.
Colorimetry: RGB, YPbPr.
Pixel rate: 80MHz.
Sync types: separate and composite.
HDMI (1) Input Type A
(Optional Feature Package)
Single link HDMI input connector. Supports HDMI 1.3:
Colorimetry: RGB, YCbCr.
Sampling: 4:4:4 and 4:2:2.
Pixel rate: Timings up to 1080p60.