Quantum Data 881E User Manual

KEY FEATURES + BENEFITS
HDMI 1.3 Deep Color™
Up to 36-bit/pixel (12-bit/component) Deep
Color at 1080p; TMDS link up to 2.25 GB/s.
x.v.Color
Supports wide gamut color generation with
test images and metadata.
High Bit Rate Audio
Generates Dolby
®
formats Plus & TrueHD lossless
compressed audio format.
Image Control Tool (882E)
Web-based Image Control Tool for fine tuning Deep
Color images.
central administration/network control
Update and configure all networked instruments from
a single computer. Fully control instrument from any
network location with web browser or Telnet client.
HDMI + DVI Analyzer (882E with analyzer)
Single link analyzer (up to 150 MHz) for
measuring source timing & pixel errors and emulated
EDIDs. Include formatted reports.
HDCP including compliance test
Production keys included with HDMI and DVI signals.
Runs HDCP compliance test (optional with 882EA).
graphics SDK
Create complex patterns based on your
specifications using C++ software development kit.
analog video (optional, not available
with 882E with analyzer)
Up to 250 MHz.
CEC
Interactive Troubleshooting Environment (ITE) for CEC
development (optional with 882E and 882EA). Test
Management Environment (TME) for CEC compliance
(optional with 882EA).
Auxiliary Channel Analyzer (ACA)
(882E/EA only)
Monitor DDC, HDCP, CEC and EDID transactions
comprehensive timing + patterns
Includes extensive library of standard timings and
patterns. Add your own custom timings and patterns.
local pattern storage
Store multiple custom images (.bmp, .jpg
and .png) images in instrument.
easy to use
Access powerful features easily using intuitive user
interface.
DUT-based setup
Specify device under test to automatically
set up instrument.
multiple configurations
Save and restore different instrument configurations
for different users or applications.
Note: 882EA shown in photo.
V I D E O T E S T I N S T R U M E N T S
Introducing the latest video test instrument from Quantum Data, the
881E/882E. The HDMI interface supports the latest HDMI 1.3 standard,
with up to 36-bit/pixel (12-bit/component) Deep Color mode x.v.Color wide
gamut color and high bit audio formats. The 882E can be equipped with
the analyzer functionality for testing HDMI 1.3 source devices.
881E/882E HDMI

Quantum Data 881E Specifications

General

Model	Quantum Data 881E
Category	Test Equipment
Color Depth	Up to 12-bit
Power Requirements	100-240V AC, 50/60Hz
Operating Temperature	0°C to 40°C
Storage Temperature	-20°C to 60°C
Type	Video Test Equipment
Video Formats	HDMI
Resolution	Up to 4K
Audio Formats	HDMI
Connectivity	USB, Ethernet
Control Interface	Front Panel

Summary

Key Features and Benefits of 881E/882E HDMI

HDMI 1.3 Deep Color Support

Up to 36-bit/pixel Deep Color at 1080p with 2.25 GB/s TMDS link.

x.v.Color Wide Gamut

Supports wide gamut color generation with test images and metadata.

High Bit Rate Audio Formats

Generates Dolby Plus & TrueHD lossless compressed audio formats.

Image Control Tool for 882E

Web-based tool for fine-tuning Deep Color images on the 882E.

Central Administration and Network Control

Manage all networked instruments from a single computer via network.

HDMI + DVI Analyzer for 882E

Single link analyzer for measuring source timing & pixel errors.

HDCP and Compliance Testing

Includes production keys and runs HDCP compliance tests.

Graphics SDK for Custom Patterns

Create complex patterns using C++ software development kit.

CEC Testing and Development

Supports CEC development and compliance testing.

Auxiliary Channel Analyzer (ACA)

Monitors DDC, HDCP, CEC, and EDID transactions on 882E/EA.

Comprehensive Timing and Patterns

Extensive library of standard timings and patterns; custom patterns supported.

Local Pattern Storage

Store multiple custom image files (.bmp, .jpg, .png) within the instrument.

DUT-Based Setup

Specify device under test to automatically set up the instrument.

Multiple Configurations

Save and restore instrument configurations for different users or applications.

Specifications for 881E/882E HDMI

HDMI 1.3 Specifications

Details connector, TMDS protocols, encoding, sampling modes, and color depth.

HDMI Audio Test Features

Vary audio sampling rate, frequency, and amplitude for sink handling tests.

EDID Read and Testing

Reads EDID from display and tests using I2C protocols per VESA E-DDC.

EDID Compliance Testing (882)

Performs HDMI EDID processing and compliance checks.

Digital Video Swing Test

Tests TMDS digital video signal swing in 4mV increments.

Scrolling Image Test

Allows scrolling static images for testing across interfaces.

Special Sync Tool

Trigger scope or inspection camera for video sync analysis.

Format Generation

Supports over 580 formats; includes graphical editor for custom formats.

Pattern Storage

Stores standard and custom static/dynamic patterns for CRTs and FPDs.

Test Sequence Creation

Create sequences with unlimited steps for automated testing.

Analog Component Specifications

Details color encoding, video levels, sync swing for analog component option.

Digital Sync Outputs

Specifies HS, VS, and Special Sync outputs and voltage levels.

Pixel Clock Specifications

Defines pixel clock frequency range and accuracy.

HDMI Video Specifications

Color depth, clocks per pixel, TMDS swing, and quantization modes.

Horizontal Timing Parameters

Specifies horizontal timing frequency, pixel counts, and steps.

Vertical Timing Parameters

Specifies vertical timing frequency, line counts, and steps.

Video Memory

Details video memory size and maximum width for pixel data.

Administration and Control Interfaces

Covers physical UI, RS-232, Ethernet, GPIB, and SDK for control.

Analyzer Option Features

Overview of Analyzer Option

Tests HDMI 1.3 deep color source products, verifying signal quality and timing.

EEPROM Emulator and EDID Editor

Emulates EEPROM with re-programmable E-EDID for sink device response testing.

Hot-Plug Generator

Generates hot-plug events in conjunction with E-EDID changes.

Timing Analyzer

Measures timing of external video signals including pixel rate and sync delays.

Pixel Data Analyzer

Measures pixel values, detects flickering pixels, and tallies pixel errors.

Packet Analyzer

Displays InfoFrame, control, audio, and generic data with channel status.

Pseudo-Noise Analyzer

Measures errors using QDI-BCM patterns, including pixel and PN error rates.

HDMI TX Ports

Used for monitoring incoming HDMI signals.

SPDIF Out Port

Extracts audio embedded in incoming HDMI stream.

HDCP Functional Testing

Tests content protection protocol using provided production keys.

CEC Testing (Optional)

ITE and TME support debug and compliance testing for CEC.

Pseudo-Noise Generator Features

Generates QDI-BCM noise patterns with configurable sequence length and seed.

Analyzer-Related Images

Includes FormatRx, PacketRx, ErrorRx for HDMI Hardware.

Transmitter and Receiver ICs

Features Sil9134 transmitter and Sil9135 receiver ICs.