Product Safety Symbols
The symbols below are used on the power chair to identify warnings, mandatory actions, and prohibited
actions. It is very important for you to read and understand them completely.
NOTE: There are more warnings identified and explained in the Consumer Safety Guide that
is included with your power chair. Please become familiar with all the warnings and safety
information found in the Consumer Safety Guide and refer to this resource often.
Locked and in drive mode.
Place unit on level ground and stand to one side when changing from drive mode to freewheel
mode or freewheel mode to drive mode.
Unlocked and in freewheel mode.
Read and follow the information in the owner’s manual.
Indicates power chair securement points.
Power chair information label
Manufactured in
Class II Equipment
Indicates that power chair, with similarly labeled seating system, conforms to ANSI/RESNA WC/
Vol. 4, Section 19 for transport of an occupied power chair in a motor vehicle.
Safety
XXXXXXX:
XX XX (XX XX)
XXXXXX: XXXXXXX
XXXXXXX:
XX XX (XX XX)
XXXXXXX: XXXXXXX
182 Susquehanna Avenue
Exeter, PA 18643
Indicates power chair with a similar label is not rated for occupied transit.
To Next Page
Loading...
