To Next PageTo Next Page
Need help?Do you have a question about the Quantum Q4 and is the answer not in the manual?
General| Weight Capacity | 300 lbs |
|---|---|
| Maximum Speed | 4 mph |
| Overall Width | 24 inches |
| Weight | 120 lbs |
| Seat Width | 18 inches |
| Seat Depth | 16 inches |
| Backrest Height | 18 inches |
| Battery Size | 12V |
| Per-Charge Range | 15 miles |
| Color Options | Blue, Red |
Describes the product's intended purpose and application.
Explains regulatory requirements for selling and ordering the device.
Welcome message and emphasis on understanding the manual for safe operation.
Legal terms and conditions accepted upon product delivery.
Instructions for checking delivery completeness and handling transport damage.
Explains symbols used in the manual and on the power chair.
Provides essential operational advice and precautions for new users.
Lists critical inspections before operating the power chair.
Introduces the power chair's main assemblies and electrical components.
Details the controller, batteries, motors, and wiring harnesses.
Explains how to disengage drive motors for manual maneuvering.
Covers initial setup and how to install the seat assembly onto the power base.
Details how to properly route and connect the controller harness.
Explains how to use securement points for vehicle transport.
Outlines types of adjustments like seat height, angle, and armrest.
Details how to adjust the seatback angle using a lever.
Explains adjustments for power recline, tilt, and leg rests via controller.
Describes how to adjust the seat angle (dump) within a specified range.
Details the procedure to adjust the seat to one of three heights.
Explains how to adjust the seat width between 16 and 20 inches.
Details how to adjust the leg rest width from 16 to 20 inches.
Explains how to adjust the armrest height in 1-inch increments.
Guides on moving the controller for preferred hand use or proximity.
Covers installation, adjustment, and safety warnings for the positioning belt.
Discusses the Q4's 12-volt deep-cycle batteries and safe handling.
Explains the process, precautions, and recommendations for charging the power chair batteries.
Details how to use the charger and break in new batteries for optimal performance.
Answers common questions about charging and provides tips for maximizing battery range.
Provides guidance on storing the power chair and maximizing battery lifespan.
Discusses battery types, troubleshooting weak batteries, and transport considerations.
Covers basic cleaning, avoiding water, and temperature effects on the chair and batteries.
Provides operational guidelines, controller care, tire inflation, and sidewall maintenance.
Details daily, weekly, monthly, and yearly checks for proper chair function.
Covers proper storage, disposal regulations, and cleaning procedures.
Provides a step-by-step guide for replacing pneumatic or solid tires.
Details the process for replacing the power chair batteries safely and correctly.
Lists symptoms requiring professional service and corrective actions for power issues.
