EasyManuals Logo

Quantys QY100 User Manual

Default Icon
41 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #19 background imageLoading...
Page #19 background image
During the reception period, which lasts about a few
minutes, the hards remain in their I position. The
complete procedure involving the hands moving to the
exact time lasts up to 5 minutes. Outside Germany, the
daily automatic time synchronisation with the time
signal transmitter takes place at night
Please never keep the upper button pressed down
when inserting the battery. In case j doubt repeat the
starting procedure.
Possible sources off interference
As is the case for any radio-controlled receiver, the radio-
controlled alarm clock may also 1 be subject to certain
reception restrictions and transmitter interferences. The process
ot .f setting can only be delayed in sites with extremely bad
reception, for example thunderstorms or strong damping from a
building (metal construction elements) or atmospheric
disturbance.
As well as unshielded household devices, television sets and
personal computers coulc be mentioned as sources of
interference in the household. Temporary downtimes of the :
broadcaster may also occur.
Note for use on long Journeys (outside off Europe):
Please note that the RAM battery should not be taken out
during your journey, because I the current time information
could get lost if this happens. It is not generally possible to 1 set
the time manually.
Summertime/wintertime
Adjustment from summer to winter time and vice versa
At the currently applicable adjustment times your alarm clock
makes the adjustment by moving forward by one hour for
summer time (Central European Summertime) or by moving
forward by eleven hours for winter time (Central European
Tme).
ALARM FUNCTIONS
ALARM
The alarm has two crescendo steps and two
different intervals. 10
Setting the alarm time
Set the alarm time by turning the time setting wheel (seen
frcom the back of tfre alarm clock) in direction of the arrow.
Activating the alarm
Push the "Alarm on/off switch at the side upwards. The
alarrm activation is opbonaly shown by an orange window on
the clock face.
Alarm interruption (snooze operation)
Briefly press the top button. The alarm
signal is interrupted for 4 minutes and then
sounds again.
The snooze function can be repeated for as long as the
alarm is activated until 45 minutes after the alarm time.
The alarm signal is automatically exited after 2 minutes, if it
is not interrupted or jeactivated
Switching off the alarm signal
n order to switch off the alarm, press the "Alarm on'ofT
switteh at the side downwards, fhe orange window on the
dock face is no onger visible.
ILLUMINATION
With every fret further alarm the lighting is switched on
automatically for 5 seconds.
r
or the duration of every button
press the dock face lighting is activated, and it remains
activated tor approx. 5 seconds.
rVe use an EL foil in order to ensure even
illumination of the dial. CHANGING THE
BATTERY
10

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Quantys QY100 and is the answer not in the manual?

Quantys QY100 Specifications

General IconGeneral
BrandQuantys
ModelQY100
CategoryAlarm Clock
LanguageEnglish