IS20 Manual
V 1.0 7 of 23 2023
POWER. Press and hold to power on. Press and hold 5 seconds to switch off.
Double click to enter setup page.
UP ARROW. Move up in menu, next favourite page, or increase a numeric
value.
DOWN ARROW. Move down in menu, previous favourite page, or decrease a
numeric value.
ENTER. Select a menu option and to enter the next menu level.
OK. Select menu item or save the setting.
4. Connecting the display
The IS20 has the following options for connection to inputs, outputs and host devices at rear (from left to
right):
• Type-C USB connector
• Power/ NMEA 0183 input & output connector
• NMEA 2000 connector
• WiFi antenna
Figure 6 IS20 connector view
To Next Page
Loading...