Quarton ML-200 User Manual

ML-100 / ML-200
INSTRUCTIONS
OPERATION FUNCTIONS
OPERATION THE ML-100 / ML-200
1. Attach the ML-100 / ML-200 to the cutting machine with four M4 screws (screws not included).
2. Plug in ML-100 / ML-200 with the Type-C to USB Male Cable, then connect cable to the USB adapter.
3. USB adapter plug in the outlet and turn on the ON/OFF switch.
4. Loose the fixing screw gently and adjust the module housing to project the laser
line into position you want. Tighten the fixing screw to fix the laser’s position.
5. Loose the fixing ring. Rotate the adjustable bushing to find the angle you want.
Tighten the fixing ring to fix the laser line’s angle.
6. Cut the stuff along the laser line.
APPLICATIONS
Fixing ring
Laser aperture
ON/OFF switch
Module housing
Adjustable bushing
Fixing screw
Setting holes
Type C female connector

Quarton ML-200 Specifications

General

Output Power	< 1 mW
Laser Class	Class II
Operating Voltage	3 VDC
Operating Current	≤30mA
Laser Pattern	Line
Operating Temperature	-10°C ~ +50°C
Storage Temperature	-20°C ~ +60°C

Summary

ML-100 / ML-200 Operation Guide

Setup and Positioning

Attach the module, connect power via USB, and adjust laser line position and angle for desired use.

Applications

Textile Cutting Example

Demonstrates using the laser for precise cutting of textile materials.

Specifications Overview

Technical Specifications

Details key technical parameters for ML-100 and ML-200 models, including dimensions, wavelength, and output power.

Safety Precautions

Laser Safety Guidelines

Essential safety instructions to prevent eye damage and ensure safe operation, including warnings about direct exposure and unattended use.