Quartz Amber Series - User Manual

Need help?

Do you have a question about the Quartz Amber Series and is the answer not in the manual?

Summary

Installer's responsibility to ensure PPE compliance and check unit suitability for operating conditions.

Instructions for preparing drop rods, fitting washers/nuts, and leveling the unit using lock nuts.

Details on assembling and fitting the float switch/mounting bracket to the drain pipe during installation.

Explains how to connect ductwork to the fan coil spigots without excessive force, ensuring proper alignment.

Describes how to obtain accurate air volume and balancing measurements using an anemometer traverse.

Advises regular checks on the fan motor assembly for overheating, impeller condition, and airflow resistance.

Describes checking the condition of impeller blades and cleaning debris using a soft brush.

Procedure for inspecting, cleaning, and removing coils and condensate tray assembly, including safety precautions.

Importance of filter maintenance for air cleaning efficiency and procedures for filter removal and cleaning.

General