• Slow-slow
• Normal — normal
• Fast — fast
• Very Fast — very fast
Change the value with the buttons "Right" and "Left." “OK” -
exit with saving the result, “Esc” - exit without saving.
Menu item MAIN SCREEN –– SCREEN VIEW
Signograph + VDI - display of the VDI scale consisting of 16
segments, the top row - the segments of the scale, the bottom
row on the left: VDI value, the bar of the response level from
the target, bottom right - alternating values: current in the
sensor in mA, ground balance, and battery voltage in V.
Signograph is the same as the previous menu item, only
without VDI value VDI is the display of the value of the VDI
number in large digits, the signal level is on the top line above
the current values in the sensor, the level of ground balance
and the supply voltage.
LAG SIGNOGRAPH submenu item - DELAY OF SIGNOGRAPH
INDICATIONS
• Value from 0 to 31. Delay of the indication of the
signalograph allows you to better control the location of the
To Next Page
Loading...