Need help?Do you have a question about the Quasar ARM and is the answer not in the manual?
General| Brand | Quasar |
|---|---|
| Model | ARM |
| Category | Accessories |
| Language | English |
Details the purpose and operation of each physical button on the Quasar ARM device.
Explains how to power on/off, manage screen backlight, and adjust the barrier for noise reduction.
Guides on using Pinpoint for target localization and Soil Balance for accurate readings.
Introduces the device's menu system and its overall structure.
Details volume, volume variation, and sound frequency (pitch) settings.
Explains sound schemes for target ID and threshold settings for background sound.
Describes the LF boost feature for controlling low-frequency audio response.
Covers using the wireless FM transmitter with headphones for comfortable searching.
Explains how to set and tune the TX frequency for optimal device performance.
Details battery level indication correction and setting the low battery warning threshold.
Guides on calibrating the device using ferrite for accurate VDI scale interpretation.
Explains how to perform sensor balance for optimal performance, referencing graphical and numerical displays.
Describes saving, loading, and resetting user profiles for custom settings.
Details how to set the screen backlight brightness from 0 to 100.
Explains adjusting the user signal PWM level for sensor current control.
Covers suppressing soil mineralization effects, adjusting depth, and scanning speed.
Describes display options like Signograph + VDI and Signograph for target information.
Explains delay settings for signalograph indications to improve target location control.
Allows enabling/disabling sectors in the VDI range to mask unwanted signals.
Details speed adjustment for auto-tuning in response to varying soil conditions.
To Next Page